Home
>
products
>
Electrolytic Tinplate Coil
>
|
|
| Place of Origin | CHINA |
| Brand Name | Decho |
| Certification | Mill Test Certificate |
| Model Number | Electrolytic Tinplate Coil |
Tinplate is most commonly used to make a variety of containers, such as food and beverage cans. However, its applications are not limited to container making; more recently, tinplate has also been used to make motor parts and many other products.
| Remark | Temper | Hardness (HR30T) |
Yield Strength (Mpa) |
Features | Typical Application | ||
| JIS G3303-2008 |
ASTM A623M-06a |
DIN EN10202-2001 |
|||||
| Single Reduced (SR) |
T-1 | T49 | TS230 | 49 ± 3 | 230 ±50 | Deep drawing which requires large flexibility. | Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter. |
| T-2 | T53 | TS245 | 53 ± 3 | 245 ±50 | Moderate drawing with some stiffness. | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, end for large can. | |
| T-2.5 | T54 | TS260 | 55 ± 3 | 260 ±50 | Combines the drawability of T-2 and the stiffness of T-3. | Battery shells, small can ends and bodies | |
| T-3 | T57 | TS275 | 57 ± 3 | 275 ±50 | Shallow drawing, proper stiffness to minimize fluting and prevent buckling. | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | |
| T-3.5 | T59 | TS290 | 59 ± 3 | 290 ±50 | Items that require better formability than T-4. | General use, pail, 18L, 4L | |
| T-4 | T61 | TH415 | 61 ± 3 | 415 ±50 | Moederate forming. Moderate (comparatively large) stiffness. |
Can bodies and ends, crown caps, closures. Body and end for small can. |
|
| T-5 | T65 | TH435 | 65 ± 3 | 435 ±50 | High Stifness, excellent buckling resistance. Increased stiffness to resist buckling. | Can ends and bodies requiring intensity. Body and end for small can. |
|
| Double Reduced (DR) |
DR-7M | T71 | TH520 | 71 ± 5 | 520 ±50 | Moderate strength and stiffness with moderate forming. | DRD bodies, dome, Lug cap & 3 piece bodies |
| DR-8 | T72 | TH550 | 73 ± 5 | 550 ±50 | High strength and stiffness. | DRD bodies, end, Lug cap & 3 piece bodies | |
| DR-8M | T73 | TH580 | 73 ± 5 | 580 ±50 | |||
| DR-9 | T75 | TH620 | 76 ± 5 | 620 ±50 | Higher strength and stiffness. | DRD bodies, Lug cap & 3 piece bodies Thnner guage body, end, DRD cans, caps. |
|
| DR-9M | T76 | - | 77 ± 5 | 660 ±50 | |||
| DR-10 | - | - | 80 ± 5 | 690 ±50 | Very large stiffness and strength | DRD bodies, Lug cap & 3 piece bodies Thnner guage body, end, DRD cans, caps. |
|
| Note: Making cans with DR materials, please pay a special attention to the rolling direction. | |||||||
CONTACT US AT ANY TIME
